新闻中心

WZP-36高频焊机感应加热设备的技术参数

  • 分类:新闻资讯
  • 作者:沈丘永达高频
  • 来源:沈丘永达高频
  • 发布时间:2021-01-28 20:00
  • 访问量:

【概要描述】WZP-36高频焊机感应加热设备的技术参数: 工作电源: 3相380V±10%,50-60Hz 输入电压:320V-420V可以改变,取决于你国家的电力 输入电流:3-36A 输入功率:3-20KW 可调 振荡频率:15-30KHZ可以改变,取决于你的工件尺寸 主机尺寸: 410*290*500mm 18kgs 变压器尺寸:310*260*380mm 22kgs 冷却水压:0.1-0.3 MPA WZP-36高频焊机可用于合金刀具的焊接,用于焊接合金刀具的优点: 1、感应加热速度快,效率高 2、只需将铜或银焊片放到刀头和基体之间定好位即可 3、节能省电成本低 4、氧化面积小 5、焊接后外观精美 6、加热均匀,故无缺焊和漏焊点 WZP-36高频焊机用于金属件钎焊的优点: 1、感应加热速度快,效率高 2、省电节能成本低 3、一次可以同时焊接多个工件,使焊接效率大大提高 4、氧化面积小, 5、加热均匀,无缺焊和漏焊点 6、焊接后的工件外观精美、牢固 WZP-36高频焊机可用于大理石锯片焊接,木工锯片钎焊,其优点是: 1、高效、快速焊齿,每齿1—5秒; 2、重复性好,每一齿都有良好的重复性; 3、加热快速,均匀,可有效防止锯齿局部过热引起的脆化和断裂, 还可防止未焊透引起的掉齿等不良现象; 4、可焊接高性能,高硬度锯齿的锯片,这些锯片是用电阻焊无法焊接的 5、用电量少    high-frequency welding machine can be used for welding alloy tools, welding alloy tools for the advantages: 1, Induction heating speed, high efficiency 2, just put copper or silver welding piece into the head and the substrate can be a good bit 3, energy saving low cost 4, a small area of ​​oxidation 5, beautiful appearance after welding 6, heated evenly, so no lack of welding and missing solder joints    high-frequency welding machine for brazing metal parts Advantages: 1, Induction heating speed, high efficiency 2, low power saving energy 3, a number of workpieces can be welded at the same time, so that greatly improve the welding efficiency 4, the oxidation area is small, 5, heated evenly, no lack of welding and missing solder joints 6, the appearance of the workpiece after welding beautiful, solid    high frequency welding machine can be used for marble saw blade welding, woodworking saw blade brazing, its advantages are: 1, efficient, fast welding teeth, 1-5 seconds per tooth; 2, good repeatability, each tooth has a good repeatability; 3, heating fast, uniform, can effectively prevent the sawtooth local overheating caused by embrittlement and fracture, but also to prevent the impermeability caused by tooth penetration and other undesirable phenomena; 4, can be welded high-performance, high hardness sawtooth saw blades, these saw blades are welded with resistance welding 5, less power consumption

WZP-36高频焊机感应加热设备的技术参数

【概要描述】WZP-36高频焊机感应加热设备的技术参数:

工作电源: 3相380V±10%,50-60Hz

输入电压:320V-420V可以改变,取决于你国家的电力

输入电流:3-36A

输入功率:3-20KW 可调

振荡频率:15-30KHZ可以改变,取决于你的工件尺寸

主机尺寸: 410*290*500mm 18kgs

变压器尺寸:310*260*380mm 22kgs

冷却水压:0.1-0.3 MPA

WZP-36高频焊机可用于合金刀具的焊接,用于焊接合金刀具的优点:

1、感应加热速度快,效率高

2、只需将铜或银焊片放到刀头和基体之间定好位即可

3、节能省电成本低

4、氧化面积小

5、焊接后外观精美

6、加热均匀,故无缺焊和漏焊点

WZP-36高频焊机用于金属件钎焊的优点:

1、感应加热速度快,效率高

2、省电节能成本低

3、一次可以同时焊接多个工件,使焊接效率大大提高

4、氧化面积小,

5、加热均匀,无缺焊和漏焊点

6、焊接后的工件外观精美、牢固

WZP-36高频焊机可用于大理石锯片焊接,木工锯片钎焊,其优点是:

1、高效、快速焊齿,每齿1—5秒;

2、重复性好,每一齿都有良好的重复性;

3、加热快速,均匀,可有效防止锯齿局部过热引起的脆化和断裂, 还可防止未焊透引起的掉齿等不良现象;

4、可焊接高性能,高硬度锯齿的锯片,这些锯片是用电阻焊无法焊接的

5、用电量少

 

 high-frequency welding machine can be used for welding alloy tools, welding alloy tools for the advantages:

1, Induction heating speed, high efficiency

2, just put copper or silver welding piece into the head and the substrate can be a good bit

3, energy saving low cost

4, a small area of ​​oxidation

5, beautiful appearance after welding

6, heated evenly, so no lack of welding and missing solder joints

 

 high-frequency welding machine for brazing metal parts Advantages:

1, Induction heating speed, high efficiency

2, low power saving energy

3, a number of workpieces can be welded at the same time, so that greatly improve the welding efficiency

4, the oxidation area is small,

5, heated evenly, no lack of welding and missing solder joints

6, the appearance of the workpiece after welding beautiful, solid

 

 high frequency welding machine can be used for marble saw blade welding, woodworking saw blade brazing, its advantages are:

1, efficient, fast welding teeth, 1-5 seconds per tooth;

2, good repeatability, each tooth has a good repeatability;

3, heating fast, uniform, can effectively prevent the sawtooth local overheating caused by embrittlement and fracture, but also to prevent the impermeability caused by tooth penetration and other undesirable phenomena;

4, can be welded high-performance, high hardness sawtooth saw blades, these saw blades are welded with resistance welding

5, less power consumption

  • 分类:新闻资讯
  • 作者:沈丘永达高频
  • 来源:沈丘永达高频
  • 发布时间:2021-01-28 20:00
  • 访问量:
详情

WZP-36高频焊机感应加热设备的技术参数:

工作电源: 3380V±10%50-60Hz

输入电压:320V-420V可以改变,取决于你国家的电力

输入电流:3-36A

输入功率:3-20KW 可调

振荡频率:15-30KHZ可以改变,取决于你的工件尺寸

主机尺寸: 410*290*500mm 18kgs

变压器尺寸:310*260*380mm 22kgs

冷却水压:0.1-0.3 MPA

WZP-36高频焊机可用于合金刀具的焊接,用于焊接合金刀具的优点:

1、感应加热速度快,效率高

2、只需将铜或银焊片放到刀头和基体之间定好位即可

3、节能省电成本低

4、氧化面积小

5、焊接后外观精美

6、加热均匀,故无缺焊和漏焊点

WZP-36高频焊机用于金属件钎焊的优点:

1、感应加热速度快,效率高

2、省电节能成本低

3、一次可以同时焊接多个工件,使焊接效率大大提高

4、氧化面积小,

5、加热均匀,无缺焊和漏焊点

6、焊接后的工件外观精美、牢固

WZP-36高频焊机可用于大理石锯片焊接,木工锯片钎焊,其优点是:

1、高效、快速焊齿,每齿15;

2、重复性好,每一齿都有良好的重复性;

3、加热快速,均匀,可有效防止锯齿局部过热引起的脆化和断裂, 还可防止未焊透引起的掉齿等不良现象;

4、可焊接高性能,高硬度锯齿的锯片,这些锯片是用电阻焊无法焊接的

5、用电量少

 

 high-frequency welding machine can be used for welding alloy tools, welding alloy tools for the advantages:

1, Induction heating speed, high efficiency

2, just put copper or silver welding piece into the head and the substrate can be a good bit

3, energy saving low cost

4, a small area of ​​oxidation

5, beautiful appearance after welding

6, heated evenly, so no lack of welding and missing solder joints

 

 high-frequency welding machine for brazing metal parts Advantages:

1, Induction heating speed, high efficiency

2, low power saving energy

3, a number of workpieces can be welded at the same time, so that greatly improve the welding efficiency

4, the oxidation area is small,

5, heated evenly, no lack of welding and missing solder joints

6, the appearance of the workpiece after welding beautiful, solid

 

 high frequency welding machine can be used for marble saw blade welding, woodworking saw blade brazing, its advantages are:

1, efficient, fast welding teeth, 1-5 seconds per tooth;

2, good repeatability, each tooth has a good repeatability;

3, heating fast, uniform, can effectively prevent the sawtooth local overheating caused by embrittlement and fracture, but also to prevent the impermeability caused by tooth penetration and other undesirable phenomena;

4, can be welded high-performance, high hardness sawtooth saw blades, these saw blades are welded with resistance welding

5, less power consumption

关键词:

扫二维码用手机看

中科